Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/22199
Title: A creep model for high-density snow
Authors: Haehnel, Robert B.
Keywords: Creep deformation
Finite element method
Foundations--Cold weather conditions
Greenland
Polar construction
Snow
Snow mechanics
Publisher: Cold Regions Research and Engineering Laboratory (U.S.)
Engineer Research and Development Center (U.S.)
Series/Report no.: ERDC/CRREL;TR-17-7
Abstract: Abstract: This effort modifies Mellor and Smith’s creep model for dense snow to conform to the more general creep power law form (Glen’s creep law for ice is a special case of this power law). The present study used this general form as the basis for developing two creep models: one to describe the primary creep and another that models secondary creep response as a function of applied stress, snow density, and temperature. Available laboratory data helped to determine the parameters for these models. These models were recast into a form compatible with the ABAQUS finite element soft-ware to allow simulation of settlement of a snow foundation subjected to a long-term load. The secondary creep model was validated against the observed settlement of a spread foundation on snow at Camp Century, Greenland. Though there were not suitable field data to validate the primary creep model, comparison of that model to results obtained for the secondary creep model demonstrate that the primary creep model behaved as expected. Additional work is necessary to merge the primary and secondary creep models and to further validate the primary creep response of the model presented here.
URI: http://hdl.handle.net/11681/22199
http://dx.doi.org/10.21079/11681/22199
Appears in Collections:Technical Report

Files in This Item:
File Description SizeFormat 
ERDC-CRREL TR-17-7.pdf966.19 kBAdobe PDFThumbnail
View/Open