Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/9400
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWuebben, James L.-
dc.date.accessioned2016-06-20T13:41:41Z-
dc.date.available2016-06-20T13:41:41Z-
dc.date.issued1978-06-
dc.identifier.urihttp://hdl.handle.net/11681/9400-
dc.descriptionCRREL Report-
dc.descriptionAbstract: A model investigation of drifting snow conditions was conducted in a hydraulic flume using a sand-water analog. Model results were evaluated to define modeling parameters that would allow quantitative correlation between measured prototype drift conditions and the model. The modeled structure was the standard plan snow fence designed by the Wyoming Highway Department and installed along Interstate Highway 80 in 1971. The performance of this system was documented by the Rocky Mountain Forest and Range Experiment Station of the U.S. Forest Service. Models of the fence were constructed for three fence heights and two geometric scales. Geometric scaling was based on terrain roughness and boundary layer thickness considerations, while velocity scaling was based on particle fall velocity and threshold of motion characteristics. Simulation of the atmospheric boundary layer was found to be of primary importance. Velocity scaling analysis suggested the use of a "significant wind" concept based on a combination of velocity magnitude and frequency. Similarity of precipitation rate was not essential, and could be altered within limits to adjust the time scale. The response of the model to the shape of model elements was significant. Although the model is distorted and inexact similarity is achieved, it appears useful on a practical basis.-
dc.publisherCold Regions Research and Engineering Laboratory (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relationhttp://acwc.sdp.sirsi.net/client/en_US/search/asset/1011598-
dc.relation.ispartofseriesCRREL report ; 78-16.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectAtmosphere-
dc.subjectBoundary layer-
dc.subjectSnow-
dc.subjectDrifting snow-
dc.subjectHydraulic model-
dc.subjectSnow fence-
dc.titleA hydraulic model investigation of drifting snow-
dc.typeReport-
Appears in Collections:CRREL Report

Files in This Item:
File Description SizeFormat 
CR-78-16.pdf1.89 MBAdobe PDFThumbnail
View/Open