Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributorThayer School of Engineering.-
dc.contributor.authorForland, Kathryn A.-
dc.contributor.authorTatinclaux, Jean-Claude.-
dc.descriptionCRREL Report-
dc.descriptionAbstract: This study investigates the relative influence of various parameters on the kinetic friction coefficient μk between ice and different surfaces. Friction tests were performed with urea-doped, columnar ice, studying the parameters of normal pressure, velocity, type of material, material roughness, ice orientation, ice hardness and test configuration. Tests were conducted by pulling a sample of ice over a sheet of material and by pulling a sample of material over an ice sheet. An ambient temperature of -1.5 ± 1°C was maintained throughout, and the ice surface hardness was measured using a specially designed apparatus. The results of the friction tests revealed that the behavior of μk with varying velocity was significantly influenced by the test configuration and material roughness. The magnitude of the kinetic friction coefficient was also affected by varying normal pressure, surface roughness and ice hardness. Additional guidelines for standardized ice friction tests and future investigations were recommended.-
dc.publisherCold Regions Research and Engineering Laboratory (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relation.ispartofseriesCRREL report ; 85-6.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectIce engineering-
dc.subjectKinetic friction coefficient-
dc.subjectModel tests-
dc.titleKinetic friction coefficient of ice-
Appears in Collections:CRREL Report

Files in This Item:
File Description SizeFormat 
CR-85-6.pdf2.86 MBAdobe PDFThumbnail