Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/7424
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWooley, Ronald T.-
dc.date.accessioned2016-05-06T14:32:32Z-
dc.date.available2016-05-06T14:32:32Z-
dc.date.issued1998-01-
dc.identifier.urihttp://hdl.handle.net/11681/7424-
dc.descriptionTechnical report-
dc.descriptionMcAlpine Locks and Dam are on the Ohio River at the northwestern end of Louisville, KY, 606.8 miles below Pittsburgh, PA. The structures, including the dam, the canal, and locks, extend from mile 604.4 to mile 607.4. The upper pool of the dam extends approximately 75 miles upstream to Markland Locks and Dam near Warsaw, KY. The provisional plan recommended in the McAlpine Navigation Feasibility Report consists of constructing an additional 110- by 1,200-ft lock in place of the existing auxiliary chamber. This would result in two locks 100 ft wide by 1,200 ft long. The new lock would be parallel to the existing 1,200-ft lock, with the upper gates in approximately the same location as the existing lock upper gate. A guide wall would extend upstream 1,275ft beyond the upper miter gate monolith and tie into the existing canal wall. A south guide wall would extend 1,200 ft beyond the lower miter gate monolith. A fixed-bed model reproduced the Louisville and Portland Canal, the existing locks, a limited section of the Ohio River immediately upstream of the canal, that part of the river channel between Shippingport Island and the fixed crest weir connecting the upper and lower spillways, and the lower approach to the locks at an undistorted scale of 1:80.-
dc.publisherCoastal and Hydraulics Laboratory (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relationhttp://acwc.sdp.sirsi.net/client/en_US/search/asset/1000539-
dc.relation.ispartofseriesTechnical report (U.S. Army Engineer Waterways Experiment Station) ; CHL-98-4.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectFixed-bed models-
dc.subjectHydraulic models-
dc.subjectLocks (Waterways)-
dc.subjectMcAlpine Locks and Dam-
dc.subjectNavigation conditions-
dc.subjectOhio River-
dc.titleNavigation conditions at McAlpine Locks and Dam, Ohio River: hydraulic model investigation-
dc.typeReporten_US
Appears in Collections:Technical Report

Files in This Item:
File Description SizeFormat 
TR-CHL-98-4.pdf4.83 MBAdobe PDFThumbnail
View/Open