Please use this identifier to cite or link to this item:
|Title:||A method for designing deep underground structures subjected to dynamic loads|
|Authors:||United States. Defense Nuclear Agency.|
United States. Army. Office of the Chief of Engineers.
Drake, James L.
Britt, James R.
|Publisher:||Weapons Effects Laboratory (U.S.)|
Engineer Research and Development Center (U.S.)
|Series/Report no.:||Technical report (U.S. Army Engineer Waterways Experiment Station) ; N-76-9.|
Abstract: This report describes solutions to a class of dynamic elastoplastic problems that model some of the salient features of the response of hardened underground facilities in rock. The theoretical model consisted of multilayered concentric cylinders of elastoplastic materials with time-dependent loads applied to the exterior boundary. Each element in the cross section was assumed to be incompressible and its yield governed by a Mohr-Coulomb failure criterion. The number of elements within the cross section was not limited. Solutions of the theoretical model were cast in the general form normally used in structural dynamics: Mass x Acceleration External applied load - Internal resistance The resulting equations can be quickly and inexpensively evaluated on a digital computer. To extend the range of validity of the exact theory, a first-order correction factor was developed to account for the compressibility of the materials, and a simple method to treat backpacked structures was introduced. The theory was verified by comparing calculated values with experimental measurements from small-scale static and explosively driven tunnel collapse studies. Good agreement was noted for all cases considered.
|Rights:||Approved for public release; distribution is unlimited.|
|Appears in Collections:||Technical Report|