Please use this identifier to cite or link to this item:
|Title:||Investigation of methods of preparing horizontal construction joints in concrete. Report 3, Effects of iron stain on joints|
|Authors:||McDonald, J. E. (James E.)|
Smith, Eugene F.
|Keywords:||U.S. Army Engineer Waterways Experiment Station (WES) - Technical Report -|
|Publisher:||U.S. Army Engineer Waterways Experiment Station.|
Engineer Research and Development Center (U.S.)
|Series/Report no.:||Technical report (U.S. Army Engineer Waterways Experiment Station) ; no. 6-518 rept.3.|
Abstract: Twenty-four 2-ft concrete cubes were cast each in two 12-in. lifts. Three cubes were cast for each of eight different horizontal construction joint conditions, the joint being the horizontal plane between lifts. A series of strength tests (shear and flexural) was made on cores drilled from each cube to evaluate the effect of iron stain on the horizontal construction joint. An analysis of the results indicated that a strong concentration of iron stain on the joint does not significantly affect the shear and flexural strengths of the joint.
|Rights:||Approved for public release; distribution is unlimited.|
|Appears in Collections:||Documents|
Files in This Item:
|WES-Technical-Report-No-6-518-Report-3.pdf||4.37 MB||Adobe PDF|