Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributorUniversity of California, Berkeley. Wave Research Laboratory-
dc.contributorUnited States. Army. Office of the Chief of Engineers-
dc.contributor.authorTickner, Ernest G.-
dc.descriptionTechnical Memorandum-
dc.descriptionAbstract: Wind tide and wave conditions in shallow water were studied in a laboratory channel with a rough bottom. Common window screen arranged in strips, 0.10 foot in height, across the channel was used to simulate a vegetative roughness as often found in shallow lakes and bays. This roughness increased the set-up over a smooth bottom condition by a factor of about 2 when the water depth was slightly above the top of the roughness. When the water depth was half way up on the roughness strips, the set-up was 0.08 of that for the smooth bottom conditions with the same depth. The wave heights are not affected by the roughness if the ratio of the still-water depth to the roughness height is greater than 4, but when the ratio is less than 4, waves predicted by using the "effective depth" in the channel compare favorably with those predicted for a smooth bottom where the depth is equivalent to the effective depth.-
dc.publisherUnited States, Beach Erosion Board-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relation.ispartofseriesTechnical memorandum (United States. Beach Erosion Board) ; no. 95.-
dc.rightsApproved for Public Release, Distribution is Unlimited-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectWater waves-
dc.subjectBed load-
dc.subjectWind set-up-
dc.subjectWind tide-
dc.titleEffect of bottom roughness on wind tide in shallow water-
Appears in Collections:Technical Memorandum

Files in This Item:
File Description SizeFormat 
BEB-TM-95.pdf2.67 MBAdobe PDFThumbnail