Please use this identifier to cite or link to this item:
https://hdl.handle.net/11681/32387| Title: | Initialization and setup of the Coastal Model Test Bed : CSHORE |
| Authors: | Young, David L. Bak, A. Spicer. Johnson, Bradley D. |
| Keywords: | Coast changes--Computer simulation Waves Hydrodynamics |
| Publisher: | Coastal and Hydraulics Laboratory (U.S.) Engineer Research and Development Center (U.S.) |
| Series/Report no.: | Technical Note (Engineer Research and Development Center (U.S.)) ; no. ERDC/CHL CHETN-IV-115 |
| Abstract: | This Coastal and Hydraulics Engineering Tech Note (CHETN) introduces the application of the cross-shore wave, hydrodynamic, and morphology evolution model CSHORE in the Coastal Model Test Bed (CMTB). Numerical models such as CSHORE are frequently employed by engineers and scientists to investigate various environmental conditions that drive complex coastal morphology evolution at relatively low cost. The CMTB is an initiative to evaluate the strengths and shortcomings in the performance of these coastal numerical models by comparing the model results to high-resolution measurements at the Coastal and Hydraulics Laboratory (CHL), Field Research Facility (FRF), in Duck, NC (Bak et al. 2017). CSHORE is a one-dimensional (1D) numerical model including waves, currents, and bed evolution in the nearshore (Johnson et al. 2012; Kobayashi 2013); this document lays out the model’s current setup and configuration as part of the CMTB. |
| Description: | Technical Note |
| Gov't Doc #: | ERDC/CHL CHETN-IV-115 |
| Rights: | Approved for Public Release; Distribution is Unlimited |
| URI: | https://hdl.handle.net/11681/32387 http://dx.doi.org/10.21079/11681/32387 |
| Size: | 12 pages / 1.970 Mb |
| Types of Materials: | PDF/A |
| Appears in Collections: | Technical Note Technical Note |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| ERDC-CHL CHETN-IV-115.pdf | 2.02 MB | Adobe PDF |  View/Open |