Please use this identifier to cite or link to this item:
https://hdl.handle.net/11681/2927
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Dawkins, William P. | en_US |
dc.creator | Information Technology Laboratory (U.S.) | en_US |
dc.date.accessioned | 2016-03-15T17:00:53Z | en_US |
dc.date.available | 2016-03-15T17:00:53Z | en_US |
dc.date.issued | 1991-10 | en_US |
dc.identifier.govdoc | Instruction Report ITL-91-1 | en_US |
dc.identifier.uri | http://hdl.handle.net/11681/2927 | en_US |
dc.description | Instruction Report | en_US |
dc.description.abstract | The computer program CWALSHT was developed from specifications provided by the Computer-Aided Structural Engineering (CASE) Task Group on Sheet Pile Structures and is described in this report. The program uses classical soil mechanics procedures for determining the required depth of penetration of a new wall or assesses the factors of safety for an existing wall. NOTE: This Document supersedes IR ITL-90-1 "User's guide : computer program for design and analysis of sheet-pile walls by classical methods (CWALSHT)" | en_US |
dc.description.sponsorship | Prepared for Department of the Army, US Army Corps of Engineers, Washington, DC 20314-1000 | en_US |
dc.description.tableofcontents | PREFACE 4 CONVERSION FACTORS, NON-SI TO SI (METRIC) UNITS OF MEASUREMENT 4 PART 1: INTRODUCTION 5 Description of Program 5 Organization of Report 5 PART II: GENERAL WALL/SOIL SYSTEM 6 Sheet-Pile Wall 6 Anchor 6 Soil 6 Soil Surface 6 Soil Properties 8 Water 10 Vergical Surcharge Loads 10 Vertical Line Loads 10 Distributed Loads 10 External Horizontal Loads 11 Horizontal Line Loads 11 Horizontal Distributed Loads 11 Earthquake Effects 11 PARTK III: LOADS ON WALL 13 Calculation Points 13 Soil Pressures 13 Pressure Coefficient Method 13 Pressures by Coefficient Method 14 Wedge Methods 15 Final Pressures for Wedge Methods 16 Discussion of Soil Pressure Calculation Methods 17 Net Soil Pressures 18 Pressures Due to Surcharge Loads 18 Water Pressures 19 Design Pressures 21 Horizontal Loads 21 PART IV: DESIGN/ANALYSIS PROCEDURES 22 Factors of Safety 22 Design Procedures 23 Structural Analysis Procedure 27 Rowe's Moment Reduction for Anchored Walls 28 PART V: COMPUTER PROGRAM 32 Input Data 32 Output Data 32 Results of Application of Rowe's Moment Reduction for Anchored Walls 33 Graphics Display of Input Data 33 Graphics Display of Design Soil Pressures 34 Graphics Display of Results 34 Graphics Display of Rowe's Moment Reduction Curves for Piles in Sand 34 Units and Sign Conventions 34 PART VI: EXAMPLE SOLUTIONS 36 Cantilever Walls 36 Anchored Walls 66 REFERENCES 102 APPENDIX A: GUIDE FOR DATA INPUT A1 Source of Input A1 Data Editing A1 Input Data File Generation A1 Data Format A1 Sections of Input A2 Units A2 Predefined Data File A2 Sequence of Solutions A3 General Discussion of Input Data A3 Input Description A3 Abbreviated Input Guide A16 APPENDIX B: NOTATION B1 | en_US |
dc.format.extent | 129 pages/18.73 MBs | en_US |
dc.format.medium | PDF/A | en_US |
dc.language.iso | en_US | en_US |
dc.publisher | U.S. Army Engineer Waterways Experiment Station | en_US |
dc.relation | http://acwc.sdp.sirsi.net/client/en_US/search/asset/1033743 | en_US |
dc.relation.ispartofseries | Instruction Report ( Information Technology Laboratory (U.S.)) ; no. Instruction Report ITL-91-1 | en_US |
dc.relation.replaces | Instruction Report ITL-90-1, February 1990 | en_US |
dc.rights | Approved for public release; distribution is unlimited | en_US |
dc.source | The ERDC Library created this digital resource from scans of the Print Resource | en_US |
dc.subject | Computer-Aided Structural Engineering Project | en_US |
dc.subject | Computer programs | en_US |
dc.subject | CWALSHT (computer program) | en_US |
dc.subject | Retaining walls | en_US |
dc.subject | Safety factor | en_US |
dc.subject | Sheet piles | en_US |
dc.subject | Sheet-piling | en_US |
dc.subject | Walls | en_US |
dc.subject | Design | en_US |
dc.subject | Construction | en_US |
dc.title | User's guide : computer program for design and analysis of sheet-pile walls by classical methods (CWALSHT) including Rowe's moment reduction | en_US |
dc.type | Report | en_US |
Appears in Collections: | Instruction Report |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
IR-ITL-91-1.pdf | Instruction Report ITL-91-1 | 18.73 MB | Adobe PDF | View/Open |