Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/2375
Full metadata record
DC FieldValueLanguage
dc.contributor.authorCoastal Engineering Research Center (U.S.)-
dc.date.accessioned2016-03-11T20:51:26Z-
dc.date.available2016-03-11T20:51:26Z-
dc.date.issued1981-11-
dc.identifier.urihttp://hdl.handle.net/11681/2375-
dc.descriptionTechnical note-
dc.descriptionINTRODUCTION: For the design of most coastal projects, a knowledge of the tidal variations at a specific site is required since the minimum and maximum expected water levels are important design considerations. In addition, it is necessary to relate these water level fluctuations to .a fixed land point of known elevation. Such a point is called a bench mark. This information is needed to design such projects as coastal protection structures (including beach fills), harbor improvements, and navigation channels.-
dc.publisherCoastal Engineering Research Center (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relationhttp://acwc.sdp.sirsi.net/client/en_US/search/asset/1000122-
dc.relation.ispartofseriesCoastal engineering technical note ; CETN-I-12.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource.-
dc.subjectBenchmark-
dc.subjectCoastal construction-
dc.subjectFixed elevation-
dc.subjectHydrographic surveys-
dc.subjectMean Low Water-
dc.subjectMean Lower Low Water-
dc.subjectMean Sea Level-
dc.subjectNational Geodetic Vertical Datum-
dc.subjectTidal datum-
dc.titleDefining tidal datums-
dc.typeReporten_US
Appears in Collections:Technical Note

Files in This Item:
File Description SizeFormat 
CETN-I-12.pdf349.35 kBAdobe PDFThumbnail
View/Open