Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/23150
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKovacs, Austin.-
dc.contributor.authorAtkins, Ronald T.-
dc.date.accessioned2017-09-14T13:22:07Z-
dc.date.available2017-09-14T13:22:07Z-
dc.date.issued1977-05-
dc.identifier.urihttp://hdl.handle.net/11681/23150-
dc.description.abstractThe military has frequently encountered difficulty in installing and removing anchors in the field where hard frozen ground exists. This difficulty has often precluded rapid deployment of military hardware requiring anchors for their stability or support. This report gives results of a study of four commercial breaker-rock drills, a prototype hydraulic stake driver-retriever and a prototype propellant-actuated hammer which were evaluated for the driving of anchors into hard frozen ground. The tests found that commercial breaker-rock drills can be used without modification to drive standard military GP-112/G and GP-113/G stakes into frozen ground. The study revealed that, while the hydraulic stake driver would require further development to increase its reliability, it could drive the above stakes into frozen ground. The propellant-actuated stake driver was found incapable of driving stakes into hard frozen ground and ivas not considered worthy of further development as a stake driver.en_US
dc.description.sponsorshipUnited States. Army. Corps of Engineers. Directorate of Military Construction.en_US
dc.language.isoenen_US
dc.publisherCold Regions Research and Engineering Laboratory (U.S.)en_US
dc.relation.ispartofseriesSpecial Report;77-13-
dc.subjectAnchorage (Structural engineering)en_US
dc.titleStake driving tools : a preliminary surveyen_US
dc.typeTechnical Reporten_US
Appears in Collections:Special Report

Files in This Item:
File Description SizeFormat 
Special Report 77-13.pdf6.66 MBAdobe PDFThumbnail
View/Open