Please use this identifier to cite or link to this item:
https://hdl.handle.net/11681/2190| Title: | Movement and static stresses in Dolosse |
| Authors: | Coastal Engineering Research Center (U.S.) |
| Keywords: | Dolosse Crescent City, CA Crescent City Prototype Dolosse Study Wave conditions Gages Waves |
| Publisher: | Coastal Engineering Research Center (U.S.) Engineer Research and Development Center (U.S.) |
| Description: | Technical note General: In 1986 the seaward end of the mainstem of the outer breakwater at Crescent City, CA, was rehabilitated using 680 fiber reinforced, 42-ton dolosse. As part of the Crescent City Prototype Dolosse Study (CCPDS), twenty of the 680 dolosse were instrumented to measure loading on the armor units. The instrumented units were placed near the center of the rehabilitated area. Four of the dolosse were placed in the bottom layer and the remaining 16 were positioned in the top layer. During the two years following the repair, a wealth of incident wave conditions and dolos loading and movement data were collected. Details of the CCPDS are presented in Howell, et al. (in publication). |
| Rights: | Approved for public release; distribution is unlimited. |
| URI: | http://hdl.handle.net/11681/2190 |
| Appears in Collections: | Technical Note - Section III Coastal Structures |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| CETN-III-42.pdf | 889.46 kB | Adobe PDF |  View/Open |