Please use this identifier to cite or link to this item:
https://hdl.handle.net/11681/21454Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Sollitt, Charles K. | - |
| dc.contributor.author | Cross, Ralph H. | - |
| dc.date.accessioned | 2017-02-17T22:18:19Z | - |
| dc.date.available | 2017-02-17T22:18:19Z | - |
| dc.date.issued | 1976-07 | - |
| dc.identifier.uri | http://hdl.handle.net/11681/21454 | - |
| dc.description | Technical Paper | en_US |
| dc.description.abstract | Rubble-mound breakwaters are designed to protect exposed marine areas from excessive wave activity. Observations of breakwaters interacting with surface waves in laboratory models and in full-scale field applications demonstrate that significant wave energy is transmitted through the interstices of structures commonly regarded as being impervious. The objective of this investigation is the development of a theoretical analysis to account for this phenomenon. The results are intended for use by coastal engineers to compare the effectiveness of alternative breakwater configurations, independent of repetitive experimental programs. Three breakwater configurations are considered: (a) crib-style breakwaters with vertical walls and homogeneous fill; (b) conventional trapezoidal shaped breakwaters with layered fill; and (c) pile-array breakwaters composed of vertical piles placed in symmetric patterns. The two-dimensional problem is studied. Waves are assumed to arrive at normal incidence. The theoretical development begins with the unsteady equations of motion for flow in the voids of an arbitrary porous structure. The equations are linearized using a technique which approximates the known turbulent damping condition inside the structure. This yields a potential flow problem satisfied by an eigen-series solution. Linear wave theory is assumed to apply outside the structure and the excitation is provided by a monochromatic incident wave. The reflected, transmitted, solutions at the sea-breakwater interfaces and requiring continuity of pressure and horizontal mass flux. Inclusion of sloping-face structures necessitates an estimation of the breaking losses incurred on the windward slope. A semiempirical method is used to approximate the effect of wave breaking. An experimental program is conducted to verify the analytical models. Theory and experiment yield the following general conclusions: (a) the transmission coefficient decreases with decreasing wavelength, breakwater porosity and permeability, and increasing wave height and breakwater width; (b) the reflection coefficient decreases with increasing wavelength, breakwater porosity and permeability, and decreasing breakwater width. Application of the theory is limited to wave heights which exceed the medium grain diameter. Experimental results correlate better with the theoretical transmission coefficient than with the reflection coefficient. This seems to be due to the sensitivity of the reflection coefficient to surface effects. The theory provides useful design estimates for all three breakwater water configurations and a full range of wavelengths. The proposed wave-breaking calculation gives favorable results for the sloping-face structure tested in this study. However, further comparison is needed to establish the general validity of the wave-breaking analysis. | en_US |
| dc.description.sponsorship | Massachusetts Institute of Technology. Department of Civil Engineering. | en_US |
| dc.publisher | Coastal Engineering Research Center (U.S.) | en_US |
| dc.publisher | Engineer Research and Development Center (U.S.) | en_US |
| dc.relation.ispartofseries | Technical Paper;no. 76-8 | - |
| dc.rights | Approved for public release; distribution is unlimited. | - |
| dc.source | This Digital Resource was created from scans of the Print Resource. | - |
| dc.subject | Breakwaters | en_US |
| dc.subject | Ocean waves | en_US |
| dc.title | Wave reflection and transmission at permeable breakwaters | en_US |
| dc.type | Report | - |
| Appears in Collections: | Technical Paper | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| CERC Technical Paper No 76-8.pdf | 7.35 MB | Adobe PDF |  View/Open |