Please use this identifier to cite or link to this item:
|Title:||Delaware Bay field data report|
|Authors:||United States. Army. Corps of Engineers. Philadelphia District.|
Fagerburg, Timothy L.
|Publisher:||Hydraulics Laboratory (U.S.)|
Engineer Research and Development Center (U.S.)
|Series/Report no.:||Technical report (U.S. Army Engineer Waterways Experiment Station) ; HL-95-1.|
Abstract: A field hydraulic data collection program was conducted in Delaware Bay, Chesapeak and Delaware (C&D) Canal, and Chesapeake Bay from 6 October 1992 through 13 October 1993. During this period three water level recorders, twenty salinity meters, and four fixed-depth current meters were deployed and maintained for the entire study period. The current meters and water level recorders also measured salinity. In October 1992 and again in April 1993, intensive over-the-side measurements were made for a 2-week period from five boats stationed at various locations within Delaware Bay, C&D Canal, and Chesapeake Bay. From each boat, hourly vertical profiles were made at three to five stations. The vertical profiles consisted of current speed, salinity, and water samples at five depths (three depths if the water depth was less than 35 ft). The water samples were analyzed for salinity in the laboratory to verify salinities measured by the the current meters. These data are to be used in the verification of numerical models of Delaware Bay. Appendix A presents the data collection equipment and laboratory analysis procedures. NOTE: This file is large. Allow your browser several minutes to download the file.
|Rights:||Approved for public release; distribution is unlimited.|
|Appears in Collections:||Technical Report|
Files in This Item:
|TR-HL-95-1.pdf||13.79 MB||Adobe PDF|