Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributorUnited States. Army. Corps of Engineers. Omaha District.-
dc.contributor.authorGrace, John L.-
dc.descriptionTechnical Report-
dc.descriptionAbstract: Model investigations of the outlet works for Branched Oak and Cottonwood Springs Dams were primarily concerned with hydraulic operating characteristics over a wide range of heads. Although the structures were similar in design and purpose, geometric differences required the use of separate model studies, which were conducted with 1:10-scale models that reproduced portions of the approach area, the intake structure, and the outlet conduit. The Branched Oak model also reproduced an SAF impact-type stilling basin and downstream exit channel. Both models indicated undesirable flow characteristics such as nappe flutter, sloshing, and gulping which tended to vibrate the structures. Tests indicated that the flutter could be eliminated by rounding the weir crests; the nappe sloshing could be eliminated by providing a divider-wall between and parallel to the weir crests; and the gulping beneath the cover plate eliminated by placing the cover plate at an elevation above that of the upper pool when the conduit begins to control flow. Performance of the original design SAF basin was satisfactory and the height of the basin training walls was sufficient to prevent overtopping. The exit channel was sloped downward and expanded laterally to permit dissipation of excess energy in turbulence rather than direct attack of channel boundaries. A riprap plan of protection was developed for the recommended exit channel configuration.-
dc.publisherHydraulics Laboratory (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relation.ispartofseriesTechnical report (U.S. Army Engineer Waterways Experiment Station) ; H-72-1.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectBranched Oak Dam-
dc.subjectCottonwood Springs Dam-
dc.subjectSouth Dakota-
dc.subjectHydraulic models-
dc.subjectHydraulic structures-
dc.subjectOpen channel flow-
dc.subjectOutlet works-
dc.subjectStilling basins-
dc.titleOutlet works for Branched Oak and Cottonwood Springs Dams, Oak Creek, Nebraska, and Cottonwood Springs Creek, South Dakota : hydraulic model investigation-
Appears in Collections:Technical Report

Files in This Item:
File Description SizeFormat 
TR-H-72-1.pdf6.92 MBAdobe PDFThumbnail