Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/13075
Full metadata record
DC FieldValueLanguage
dc.contributor.authorVollor, Timothy W.-
dc.date.accessioned2016-07-18T15:00:21Z-
dc.date.available2016-07-18T15:00:21Z-
dc.date.issued1986-05-
dc.identifier.urihttp://hdl.handle.net/11681/13075-
dc.descriptionTechnical Report-
dc.descriptionAbstract: The objective of this project was to demonstrate and document the use of pavement recycling techniques. Host Army engineers at the working level have read about recycling but are hesitant to use recycling procedures because they do not have "hands on" experience. This pavement recycling demonstration was conducted at Fort Gillem, Ga., where both hot-mix and cold-mix recycling techniques were demonstrated. A four-lane asphalt concrete pavement road serving as the main entrance to Fort Gillem was selected to demonstrate the hot-mix recycling technique. This road had been overlaid several times leaving the surface approximately 2 in. above the PCC curb and gutter. This caused a safety hazard and would have rendered the existing curbs and gutters useless if another overlay was done. Therefore, 4 in. of the pavement was removed using the cold milling process and a 2-in. hot-recycled mix was put back so that the pavement surface tied into the original curb. A two-lane asphalt concrete pavement road serving as the truck entrance to Fort Gillem was chosen to demonstrate cold recycling. This road had extensive alligator cracking which indicated a need to strengthen the existing pavement structure. The pavement structure was pulverized, an additional binder was added as an emulsion, and the material was compacted using a vibrator steel wheel roller and a 15-ton rubber tired roller. This produced an excellent base upon which a hot-mix recycle asphalt concrete wearing surface will be added at a later date.-
dc.publisherGeotechnical Laboratory (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relationhttp://acwc.sdp.sirsi.net/client/en_US/search/asset/1025660-
dc.relation.ispartofseriesTechnical report (U.S. Army Engineer Waterways Experiment Station) ; GL-86-4.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectAsphalt pavement recycling-
dc.subjectEmulsion-
dc.subjectCold milling-
dc.subjectHot-mix asphalt recycling-
dc.subjectCold-mix asphalt recycling-
dc.subjectIn-place cold-mix asphalt recycling-
dc.subjectPavement recycling-
dc.subjectPlant mix cold asphalt recycling-
dc.subjectRecycling of asphalt-
dc.subjectSurface recycling-
dc.subjectAsphalt concrete-
dc.subjectConcrete-
dc.subjectPavements-
dc.subjectFort Gillem, Georgia-
dc.titlePavement recycling : Facilities Technology Application Test (FTAT) demonstration, FY 84, Fort Gillem, Georgia-
dc.typeDOCUMENT-
Appears in Collections:Documents

Files in This Item:
File Description SizeFormat 
TR-GL-86-4.pdf7.83 MBAdobe PDFThumbnail
View/Open