Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/11566
Full metadata record
DC FieldValueLanguage
dc.contributorThayer School of Engineering.-
dc.contributor.authorStearns, Stephen Russell, 1915--
dc.date.accessioned2016-06-20T14:21:01Z-
dc.date.available2016-06-20T14:21:01Z-
dc.date.issued1964-10-
dc.identifier.urihttp://hdl.handle.net/11681/11566-
dc.descriptionSpecial Report-
dc.descriptionSummary: One testing objective was to determine if small, select samples of natural snow-ice, tested in bending, would provide consistent and higher values for the flexural strength and modulus of elasticity. Another objective was to investigate the surface bearing properties of snow-ice layers, formed during winter on lakes or rivers, which are often separated from clear ice by an interlayer of slush or water. Samples of this type of snow-ice were obtained from Post Pond in New Hampshire. The other forms of ice-cap snow, natural snow (top and 15-ft depth), and high-density snow were tested during two summers on the Greenland ice cap. Densities in all cases were obtained by cutting a cube of snow from the sample beam adjacent to the break. The apparatus used in testing the Post Pond snow-ice beams was a modification of a Soiltest hand-operated press with a 0- to 5000-lb wooden, three-point load device. Dense snow-ice at +5° had high flexural strength (avg. 347.5 psi) and a high modulus of elasticity (avg. 6. 08 x 10^5 psi), probably the result of a large, interlocking crystal structure. The apparent relationship between modulus of elasticity and density of snow-ice is affected by the rate of loading and temperature. There appears to be a relationship between density and flexural strength for snow, snow-ice, and high-density snow in the natural undisturbed state; but processing, including snow compaction, lowers the tensile strength at early ages. The formulas used in computations are given and test results are tabulated and summarized.-
dc.publisherCold Regions Research and Engineering Laboratory (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relationhttp://acwc.sdp.sirsi.net/client/en_US/search/asset/1012046-
dc.relation.ispartofseriesSpecial report (Cold Regions Research and Engineering Laboratory (U.S.)) ; 59.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectSnow-
dc.subjectSnow properties-
dc.subjectSnow-ice-
dc.subjectIce-
dc.subjectFlexural properties-
dc.titleFlexural properties of snow and snow-ice-
dc.typeReporten_US
Appears in Collections:Special Report

Files in This Item:
File Description SizeFormat 
SR-59.pdf722.03 kBAdobe PDFThumbnail
View/Open