Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/11286
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNeeley, Billy D.-
dc.contributor.authorPoole, Toy S.-
dc.contributor.authorWeiss, Charles A.-
dc.date.accessioned2016-06-20T14:17:07Z-
dc.date.available2016-06-20T14:17:07Z-
dc.date.issued1998-07-
dc.identifier.urihttp://hdl.handle.net/11681/11286-
dc.descriptionTechnical Report-
dc.descriptionAbstract: This report presents the results of a research program examining the effects of different methods of preparing horizontal construction joints in mass concrete construction. The purpose of the research program was to confirm existing guidance or, if necessary, update it. This is the second and final report. The joint moisture conditions at the time of concrete placement were (A.) continuously moist, (B.) dry, and (C.) dry and then demoistened. There was no cleaning of the joint surface prior to placement of a second lift. The concrete mixture used in the first lift was proportioned to minimize bleeding and the resulting laitsnce. Jointed specimens were tested for direct tensile strength and shear strength. The results indicated that an addition of a small quantity of silica fume does decrease bleeding and reduce loose, flaky laitance. However, a smooth, somewhat glassy surface appears to interfere with the bonding of the next lift of concrete. Bond strengths are not as good as those when the horizontal construction joints are cleaned by high-pressure water cutting or by air-water cutting, and then allowed to dry approximately 24 hr immediately prior to placement of he next lift of concrete. This technique is not recommended. Current guidance concerning joint cleaning procedures should be followed.-
dc.publisherStructures Laboratory (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relationhttp://acwc.sdp.sirsi.net/client/en_US/search/asset/1003687-
dc.relation.ispartofseriesTechnical report (U.S. Army Engineer Waterways Experiment Station) ; SL-96-2 rept.2.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectConcrete-
dc.subjectHorizontal construction joint-
dc.subjectConcrete construction-
dc.subjectMass concrete-
dc.subjectJoints-
dc.subjectLaitance-
dc.titleMethods of preparing horizontal construction joints in mass concrete. Report 2, Minimizing laitance-
dc.typeDOCUMENT-
Appears in Collections:Documents

Files in This Item:
File Description SizeFormat 
8909.pdf3.02 MBAdobe PDFThumbnail
View/Open