Please use this identifier to cite or link to this item: https://hdl.handle.net/11681/11285
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNeeley, Billy D.-
dc.contributor.authorPoole, Toy S.-
dc.date.accessioned2016-06-20T14:17:07Z-
dc.date.available2016-06-20T14:17:07Z-
dc.date.issued1996-02-
dc.identifier.urihttp://hdl.handle.net/11681/11285-
dc.descriptionTechnical Report-
dc.descriptionAbstract: This report presents the results of a research program examining the effects of different methods of preparing horizontal construction joints in mass concrete construction. The purpose of the research program was to confirm existing guidance or, if necessary, update it. The joint cleaning procedures employed were (A.) none, (B.) high-pressure water cutting, (C.) air-water cutting, and (D.) air-water cutting to greater depth. The joint moisture conditions at the time of concrete placement were (A.) continuously moist, (B.) dry, and (C.) dry and then remoistened. Jointed specimens were tested for direct tensile strength, shear strength, and permeability. The results indicated that good bond strengths are realized when horizontal construction joints are cleaned by high-pressure water cutting or by air-water cutting, and that undercutting coarse aggregate particles does not improve the strength of the joint. The results also indicated that better bond strengths are realized when the joint surface is allowed to dry approximately 24 hr immediately prior to placement of the next lift of concrete. Recommendations are made to consider revising current guidance to permit placement of concrete on a dry surface. No revisions to current guidance are recommended concerning joint cleaning procedures.-
dc.publisherStructures Laboratory (U.S.)-
dc.publisherEngineer Research and Development Center (U.S.)-
dc.relationhttp://acwc.sdp.sirsi.net/client/en_US/search/asset/1003686-
dc.relation.ispartofseriesTechnical report (U.S. Army Engineer Waterways Experiment Station) ; SL-96-2.-
dc.rightsApproved for public release; distribution is unlimited.-
dc.sourceThis Digital Resource was created from scans of the Print Resource-
dc.subjectConcrete-
dc.subjectConcrete construction-
dc.subjectHorizontal construction joint-
dc.subjectMass concrete-
dc.subjectJoints-
dc.titleMethods of preparing horizontal construction joints in mass concrete-
dc.typeReporten_US
Appears in Collections:Technical Report

Files in This Item:
File Description SizeFormat 
13215.pdf27.28 MBAdobe PDFThumbnail
View/Open